Load data for 9 mm Steyr (Roth) + .355 | 80gr | Barnes TAC-XP

Recommended Powder(s): Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 80gr \| Barnes TAC-XP
Manufacturer SKU:	30440
Bullet Weight:	80gr \| 5.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.512" \| 13.0mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.283" \| 32.6mm
Seated Depth:	0.142" \| 3.6mm
Shank Seated Depth:	0.142" \| 3.6mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B696_C1226
Last updated:	2025-01-01

Load data for 48 loads in caliber 9 mm Steyr (Roth) with .355 | 80gr | Barnes TAC-XP bullet and 24 powders such as Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	66%	17535	90%	**09	87%
Accurate Solo 1250	<<locked>>	71%	17216	88%	**35	97%
Alliant UNIQUE	<<locked>>	71%	17318	88%	**65	91%
Baschieri & Pellagri 100	<<locked>>	65%	16853	86%	**76	99%
Hodgdon Universal	<<locked>>	64%	17143	88%	**39	97%
Hodgdon TrailBoss	<<locked>>	93%	9050	46%	**01	98%
Lovex S020	<<locked>>	66%	17187	88%	**52	93%
Maxam CSB 1	<<locked>>	74%	17622	90%	**35	97%
Maxam CSB 2 👍	<<locked>>	74%	17013	87%	**71	100%
Maxam CSB 3	<<locked>>	67%	17318	88%	**12	99%
Maxam CSB 4	<<locked>>	64%	17390	89%	**09	100%
ReloadSwiss RS 12	<<locked>>	63%	17361	89%	**75	100%
ReloadSwiss RS 14	<<locked>>	95%	8311	42%	**4	92%
ReloadSwiss RS 20	<<locked>>	76%	17260	88%	**94	93%
SNPE Vectan A0	<<locked>>	72%	17056	87%	**09	90%
SNPE Vectan BA 9	<<locked>>	65%	17434	89%	**12	95%
SNPE Vectan BA9 1/2	<<locked>>	66%	16824	86%	**12	96%
[Somchem MP200]*	<<locked>>	66%	17506	89%	**52	89%
Somchem MS200	<<locked>>	69%	17376	89%	**32	92%
Vihtavuori N320	<<locked>>	64%	16911	86%	**16	100%
Vihtavuori N32C Tin Star	<<locked>>	87%	17187	88%	**63	100%
Vihtavuori N330	<<locked>>	69%	16969	87%	**71	98%
Vihtavuori N340	<<locked>>	71%	17289	88%	**42	91%
[Vihtavuori N350]*	<<locked>>	78%	16897	86%	**58	82%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	60%	14663	75%	**24	84%
Accurate Solo 1250	<<locked>>	61%	12952	66%	**84	93%
[Alliant UNIQUE]*	<<locked>>	60%	12662	65%	**98	85%
Baschieri & Pellagri 100	<<locked>>	61%	15084	77%	**20	98%
Hodgdon Universal	<<locked>>	60%	15345	78%	**86	96%
[Hodgdon TrailBoss]*	<<locked>>	61%	5047	26%	**1	89%
Lovex S020	<<locked>>	61%	14591	74%	**63	91%
Maxam CSB 1	<<locked>>	61%	12415	63%	**58	92%
Maxam CSB 2	<<locked>>	62%	12067	62%	**11	97%
Maxam CSB 3	<<locked>>	61%	14547	74%	**30	98%
Maxam CSB 4	<<locked>>	60%	15418	79%	**47	100%
ReloadSwiss RS 12	<<locked>>	61%	16288	83%	**48	100%
[ReloadSwiss RS 14]*	<<locked>>	60%	4627	24%	**2	81%
[ReloadSwiss RS 20]*	<<locked>>	61%	11502	59%	**68	85%
[SNPE Vectan A0]*	<<locked>>	60%	12444	64%	**42	84%
SNPE Vectan BA 9	<<locked>>	61%	15722	80%	**57	94%
SNPE Vectan BA9 1/2	<<locked>>	62%	15171	77%	**60	95%
[Somchem MP200]*	<<locked>>	61%	14968	76%	**70	86%
[Somchem MS200]*	<<locked>>	61%	14272	73%	**27	89%
Vihtavuori N320	<<locked>>	62%	15838	81%	**89	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	8717	44%	**7	100%
Vihtavuori N330	<<locked>>	61%	13416	69%	**53	95%
[Vihtavuori N340]*	<<locked>>	60%	12531	64%	**78	85%
[Vihtavuori N350]*	<<locked>>	75%	15461	79%	**09	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data